PRICE:USD5400
结构特点：Structural features:
- 采用罩吸式结构，配高压强力风机。吸风配消音装置,气源及电气控制集中于同一操作柜，距离主机不小于1.5米，操作侧全封闭全罩。Adopt hood suction structure, with high pressure strong fan.Suction air with muffler, air source and electrical control concentrated in the same operation cabinet, distance from the host is not less than 1.5m, the operation side of the whole closed cover.
- 墙板铸铁结构，墙板厚度130mm。Wallboard cast iron structure, wallboard thickness of 130mm.
- 瓦楞辊材质采用48CrMo合金钢，经调质、中频淬火，表面磨光，瓦楞主辊直径¢ 280mm，表面硬度HRC58度以上。关键部位瓦辊、压力辊轴承采用瓦房店产耐高温轴承。Taken the corrugated roller material is made of 48 crmo alloy steel, after tempering, medium frequency quenching, surface polishing, corrugated roller diameter ¢280 mm, surface hardness HRC58 degrees above.Key parts of the tile roller, pressure roller bearing using wafangdian production of high temperature bearing.
- 压力辊¢ 292mm,表面磨削加工并镀铬处理；气缸控制上下移动，材料为中碳钢45号、调质处理（带缓冲装置）。Taken the pressure roller ¢292 mm, surface grinding and chrome plated treatment;Cylinder control up and down movement, material for carbon steel 45, conditioning treatment (with buffer device).
- 气动控制给胶退胶，涂胶辊直径￠216mm表面经磨光后刻有25线凹坑式网纹加工后镀硬铬处理，刮胶辊表面经磨光后镀硬铬处理。Taken the pneumatic control to glue back glue, glue spreader with 25 ￠216 mm diameter surface after polishing line after pit type checker processing hard chromium plating processing, scraping the rubber roller surface after grinding hard chromium plating processing.
- 瓦楞辊、压力辊原材料由中原特钢提供，瓦楞辊单边0.15mm上中高，压力辊单边0.075mm中高。加限位装置。压紧气缸用¢ 160mm气缸。Corrugated roll, pressure roll raw materials from the central plains special steel, corrugated roll side 0.15mm on the high, pressure roll side 0.075mm high.Add limit device.Cylinder pressure cylinder with a ¢160 mm.
- 预热辊采用天钢产无缝钢管¢ 320mm，。Taken the preheat roll using days steel seamless steel tube production ¢320 mm,.
常规技术参数：
- 工作幅宽：1600mm Working width：1600mm
- 操作方向：左置或右置（根据客户厂房确定）operation direction：left or right（according to customers’ workshop area）
- 设计速度Degin speed：80m/min
- 温度范围temperutre rang：160—200℃
- 气 源：0.4—0.9Mpa
- 加热方式：蒸汽加热 Heating model:steam heating.
辊类直径参数：Diameter of rollers
- 瓦楞辊直径Diameter of corrugated roller：￠280mm
- 压力辊直径Diameter of pressure roller：￠292mm
- 涂胶辊直径Diameter of gluing roller：￠216mm
- 预热器直径Diameter of pre-heater roller：￠320mm
- 机器尺寸machine size： 2800/1700/1900
- 机器重量 machine weight：4500kg
动力电机参数：Motors parameter
- 主驱动电机：7.5KW 额定电压：380V 50Hz 连续（S1）工作制式
- Main drive motor:7.5kw Rated voltage: 380V 50Hz continuous (S1) working mode
- 吸风电机:7.5KW 额定电压：380V 50Hz 连续（S1）工作制式
- Suction motor 7.5kw Rated voltage: 380V 50Hz continuous (S1) working mode
主要外购件、原材料及产地
Major outsourcing parts, raw materials and origin:
| 主要件名称 Main part name | 品牌或产地 | 材质型号 |
| 墙板 wall frame | 自产by our factory | HT200 |
| 传动箱 gear box | 河北Hebei | 钢件焊接 |
| 旋转接头及金属软管 Rotary joint&pipe | 滕州冠球Tengzhou Guanqiu | |
| 主驱动电机 Main drive motor | 河北Hebei | 7.5KW电机motor |
| 轴承bearing | 哈、瓦、洛HLW | |
| 带座轴承Arrange ushering bearing | 浙江五环Zhejiang Wuhuan | |
| 高压风机High pressure air blower | 上海应发shanghai Yingfa | |
| 气缸cylinder | 浙江索诺Zhejiang Suonuo | |
| 电磁阀Solenoid valve | 浙江索诺Zhejiang Suonuo | |
| 接触器contactor | 正泰Chint |
